PRODUCTS CENTER
Papua New Guinea PT-I Series Industrial Pressure Transmitter
Category:
Papua New GuineaPressure Transmitter
Papua New GuineaPressure Transmitter
Phone:400-888-8888
Product Description
Features
Enclosure protection class IP65
316L stainless steel diaphragm structure
High precision, all stainless steel structure
Micro amplifier, voltage and current signal output
Good stability, strong anti-interference
Diversified structure, easy to install and use
Wide range, measurable gauge, absolute and differential pressure
Anti-vibration, impact resistance
Application
Pressure transmitter is the most commonly used in industrial practice as a sensor, which is widely used in a variety of industrial automation environment, involving water conservancy and hydropower, railway traffic, intelligent building, production control, aerospace, military, petrochemical, oil wells, electricity, ships, Machine tools, pipes and many other industries.
| Specifications | |
| Range | -100kPa...0~10kPa...100MPa |
| Pressure Type | Gauge Pressure / Absolute Pressure / Diff. Pressure |
| Supply Voltage | 24V |
| Output (Current) | 4~20mA, 485, HART |
| Working Temp. | -20°C ~ 85°C |
| Medium Temp. | -20°C ~ 85°C |
| Storage Temp. | -4°C ~ 100°C |
| Zero Temperature Drift | ±0.1% FS (-20°C/85°C) |
| Sensitivity Temperature Drift | ±0.1% FS (-20°C/85°C) |
| Pressure Overload | 150% FS |
| Mechanical Vibration | 20g (20~5000HZ) |
| Shock | 100g (11ms) |
| Comprehensive Accuarcy | 0.2%FS / 0.5%FS |
| Insulation | 100MΩ / 250V DC |
| Response Time | 1ms (up to 90%FS) |
| Long-term Stability | ±0.1%FS/Year |
| EMC Surge | (IEC61000-4-5) 2KV |
| EMC Static | (IEC61000-4-2) Contact Discharge 8KV, Air Discharge 15KV |
| Level Protection | IP65 |
| Explosion-proof Class | Exiall CT4~T6 / Exdll CT6 Gb |
| Material | S.S. Shell; Isolation Diaphragm 316L S.S. |
| Medium Compatible | All Kinds of Medium Which Could Compatible with S.S. |
Product Image & Drawing
Wiring diagram
Product Type Selection
| Select Code (#) |
Order (Series) |
Sensor Type (S) |
Output (O) |
Shell Type (T) |
Display (D) |
Accuracy (A) |
Process Connection (C) |
Range (R) |
More (M) |
| 1 | PT-I | Diffusion Silicon Gauge Pressure |
4-20mA (Two wires) | Shell with Conventional Connector |
Without Display | 0.2%FS | M20 × 1.5 | 0/10kPa | Without Any Other Requirements |
| 2 | Diffusion Silicon Absolute Pressure |
485 Communication | Shell with Hightemperature Connector (up to 200°C steam) |
LED Display | 0.5%FS | 1/2" NPT | 0/0.6MPa | Exiall CT6 | |
| 3 | 4-20mA (Two wires) +Hart Communication |
Shell with Clip Connector (Φ50.5) |
LCD Display | 1/4" NPT | 0/4MPa | Exdll CT6 | |||
| 4 | G 1/2" | 0/25MPa | 316L S.S. Connection (Normal 304 S.S.) | ||||||
| 5 | G 1/4" | 0/35kPa | English Nameplate | ||||||
| 6 | M14 × 1.5 | 0/0.5MPa | Chinese & English Nameplate | ||||||
| 7 | Other Thread Upon Request |
0/6MPa | Neutral Nameplate | ||||||
| 8 | 0/35MPa | Radial Stainless Steel Housing (Normal for Die-cast Aluminum Housing) |
|||||||
| 9 | 0/70kPa | Axial Stainless Steel Housing (Mormal for Die-cast Aluminum Housing) | |||||||
| 9 | 0/70kPa | Axial Stainless Steel Housing (Normal for Die-cast Aluminum Housing) |
|||||||
| 10 | 0/1.6MPa | ||||||||
| 11 | 0/8MPa | ||||||||
| 12 | 0/40MPa | ||||||||
| 13 | 0/100kPa | ||||||||
| 14 | -0.1/1.6MPa | ||||||||
| 15 | 0/10MPa | ||||||||
| 16 | 0/50MPa | ||||||||
| 17 | 0/350kPa | ||||||||
| 18 | 0/2.5MPa | ||||||||
| 19 | 0/16MPa | ||||||||
| 20 | 0/60MPa | ||||||||
| 21 | Other Ranges Upon Request |
Slide to see all
To Order PT-I Industrial Pressure Transmitter
| Select Code: | Series | S1 | 02 | T3 | D3 | A1 | C4 | M2 | R6 |
| Order | PT-I- | ||||||||
| Sensor Type | Diffusion Silicon Gauge Pressure |
||||||||
| Output | 485 Communication |
||||||||
| Shell Type | Shell with Clip connector (Φ50.5) |
||||||||
| Display | LCD Display | ||||||||
| Accuracy | 0.2%FS | ||||||||
| Process Connection | G1/2" | ||||||||
| Range | 0/0.5Mpa | ||||||||
| More | Exiall CT6 |
For the example indicated above, for product code PTI-S1O2T3D3A1C4M2R6，the specs of the PT-1 Pressure Transmitter selected are:
PT-I Series, Diffusion Silicon Gauge Pressure, Output: 485 Communication, Shell with Clip Connector (Φ50.5), LCD Display, Accuracy: 0.2% FS, Process Connection: G 1/2", Range: 0-0.5MPa, Exiall CT6
CONTACT US
Changzhou Proutech International Corp.
Add: 58-1 Yulong Mid-Road 213125 Changzhou, Jiangsu, China
Tel: +86 519 85958828
Email: info@prou-tech.com
FOLLOW US
