PT-GK Series Cabburetor Vacuum Synchronizer Guage Kit
Category:
General
Multi-cylinder engines require a synchronous opening of the throttle.
By tolerances in the intake system, a setting of the throttle stop is not sufficient.
That's requires a dynamic settings.
By synchronizing the same negative pressure is reached before the carburettor.
To sync the carburettor a dial gauge for each carburettor is required.
The matching on each carburettor is done by adjustment mechanisms.
Synchronization
For motorcycles, the tank must be removed to reach the carburettor system. In this area, nearby the carburettor, there are connections for tester. Most motorcycles have caps on the connection. For car carburettor systems, the connections are on the carburettor and are closed with screw plugs. After removing the screws or the caps, the hoses and gauges can be connected directly or by means of an adapter.
After the meter is connected, the engine can be started. For motorcycle, the carburettors must beconnected to through a long hose to the tank.
Two-Cylinder-Engines
Between the carburettors there is a operating linkage with an adjustment screw. By turning the adjustment screw the throttle valve of one carburettor be open more than the other one. The readings on the clocks are adjusted so that the carburettors' the two cylinders of equal value. After this adjustment give a little bit to gas and compare the readings. After synchronize of the carburettors, adjustment of idle speed is necessary.
More than Two-Cylinder-Engines
Here are several adjustment screws available. Four-cylinder, have three adjustment screws. A screw located between the outer two carbutettors and one in the middle. First, two outer carburettors are synchronized like the 2-cylinder engine. Then adjust of the other two outer carburettors. The displayed values of different groupd, 2 left and right carburettors are not taken into account. If both carburettors of both groups synchronized, adjust the values of the two carburettor groups.
Note:
At carburettors that are activated by several cable, as e.g.for motorcycles of the manufacturer e.g. BMW and Moto Guzzi. There must be done a basic setting according to the manufacturer, before synchronized the carburettors.
Keywords: PT-GK Series Cabburetor Vacuum Synchronizer Guage Kit
Online Consulting
Please ensure the information is filled out accurately and your communication remains open. We will get in touch with you as soon as possible. Thank you!
You May Also Love
CONTACT US
Changzhou Proutech International Corp.
Add: 58-1 Yulong Mid-Road 213125 Changzhou, Jiangsu, China
Tel: +86 519 85958828
Email: info@prou-tech.com
FOLLOW US
