PT-HC Series Hydraulic Cylinders

We offer hydraulic cylinders in hundreds of different configurations, whatever the industrial application, lifting, pushing, pulling, bending, lifting... whatever the force capacity, stroke, length, or size restrictions... single- or double-acting, solid or hollow plunger, you can be sure that you can get the right cylinder at an affordable price from us.

 

Guide Ring Design

The guide ring design is for assorbing eccentric load stresses to protect your cylinder from abrasion, overextending or plunger blow-outs, or top-end mushrooming. As a result, Guide Ring cylinders provide long time, trouble-free operation.

The assembling and testing of hydraulic cylinders must only be performed by qualified hydraulic technician.

 

Hydraulic Cylinder set-ups

1. Cylinder 2.Head pump 3. Pressure gauge 4.Hose 5. Gauge adaptor 6. Male coupler

7. Female coupler 8. Manifold 9. Throttle valve 10. Connector 11. Eclectic pump 12. Safety holding valve

Set-up one: One-way hand pump+Hose+Single acting hydraulic cylinder
It is the basic system set-up. The oil reservior of pump must be larger than the oil capacity of cylinder, so as to offer full cylinder stroke.

---

Set-up Two: One-way hand pump+Manifold +Three hoses+Two single acting hydraulic cylinders
With 2-or more-port manifold. The system allows simultaneous lift of several single acting cylinders. Throttle valve installed on the outlet port of manifold regulates the flow of hydraulic fluid to or from the cylinders, so as to control the lifting height of each cylinder and maintain horizontal movement of load.

---

Set-up three: Two-way hand pump + Two manifolds + Six hoses +Two double acting hydraulic cylinders
With 2- or more-port manifold, the system allows simultaneous lift and descent of several double acting cylinders. Throttle valve installed on the outlet port of manifold regulates the flow of hydraulic fluid to or from the cylinders, so as to control the lift and descent of each cylinder and maintain horizontal movement of load.

---

Set-up four: Two-way electric pump +Two hoses + Double acting hydraulic cylinder
Double-acting cylinder set-up used for lifting application where a slow controlled descent of the load must be maintained. Throttle valve and one-way valve could be installed for regulating the flow of hydraulic fluid and controlling load descent.

---

Set-up five: Two-way electric pump +Two manifolds + Six hoses +Two double acting hydraulic cylinders
With 2- or more-port manifold, the system allows simultaneous lift and descent of several double acting cylinders. Throttle valve installed onthe outlet port of manifold regulates the flow of hydraulic fluid to or from the cylinders, so as to control the lift and descent of each cylinder and maintain horizontal movement of load.

---

Set-up Six: One-way electric pump + Manifold + Five hoses + Four single acting cylinder
With 4- or more- port manifold, the system allow simultaneous lift of several single acting cylinders. Throttle valve regulates the flow of hydraulic fluid to or from the cylinders. One- way valve allows safety holding of load in lifting applications.

 

Single-acting General Purpose Cylinders

Working pressure: 700bar

Characteristics:

 

 

Single-acting General Purpose Cylinders

 

Single-acting Low Height Cylinders

Working pressure: 700bar

Characteristics:

 

 

 

General Purpsoe Telescopic Cylinders

Working pressure: 700bar

Combination of long piston stroke and small retracted height.

Characteristics:

 

 

General Purpsoe Telescopic Cylinders

 

Low Height Telescopic Cylinders

Working pressure: 700bar

Very low retracted height Long lifting stroke

Characteristics:

 

 

Low Height Telescopic Cylinders